P355

P355 is produced in mono-block form from polyethylene with rotation molding technique. It is designed to offer comfortable and safe cruising pleasure while having a large interior volume to provide maximum usage and safe storage space. It has 100% UV additive and is not affected by seawater, algae, osmosis and corrosion, it is long-lasting and ergonomic.

Technical SpecificationsP355
BodyThe hull is made of polyethylene as mono-block and double-walled with rotation technology. (Click here for polyethylene boat features.)
Length355 cm
Width168 cm
Body Weight120 kg
Fully Equipped Weight133.5 kg
Maximum Number of People4
Maximum Horsepower30 HP
Lifting Capacity402 kg
ShaftLong – Short
Color OptionAll international RAL color codes
CertificateCE

P355 ACCESSORIES

  1. Storage box (1 Piece): Integrated with the body. It has a volume of 55 liters. The lid is made of polyethylene. It has 2 hinges. Hinges are 316 quality chromium.
  2. Seat (1 Piece) : Reinforced with the skeleton placed inside and designed as an addition to the body. It can be removed and installed as desired
  3. U bolt (1 Piece): Made of 316 quality chromium reinforced with insert to maximize durability.
  4. Chrome railing (2 Pieces): Made of 316 quality chrome with a diameter of 26mm.
  5. Cleat (3 Pieces): With 316 quality chrome, it has a special design that maximizes durability. The base of the design is 3mm, the reel is 22mm and the top is 4mm. With two inserts placed in the polyethylene body, the strength has been increased 5 times.
  6. Thole (2 Pieces): Thanks to special slot in the body, its durability is maximum. Made of 316 chromium. The base is 3 mm and the bar has 18 mm radius. With two inserts placed in the polyethylene body, the strength has been increased 5 times.
  7. Handle (2 Pieces): Manufactured as 3 mm of 316 quality chrome. It is specially designed to be comfortable to grasp and prevent damage to hand. With two inserts placed in the polyethylene body, the strength has been increased 5 times.
  8. Engine mirror (1 Piece): 18mm plywood is fixed into the rotational polyethylene, by preventing direct contact with the water it becomes equally lasting with the polyethylene body.
  9. Mirror chrome (1 Piece) : Made of 3mm 316 quality chrome. A ridged surface has been created to prevent the engine from sliding.
  10. Water evacuation stopper (2 Pieces): Allows the water on the boat to be discharged out of the drain channels when desired.
  11. Wall cap (2 Pieces): Suitable to use as an extra storage area and increase the boat weight. It eliminates the moisture between the walls.