P430 is produced in mono-block form from polyethylene with rotation molding technique. It is designed to offer comfortable and safe cruising pleasure while having a large interior volume to provide maximum usage and safe storage space. It has 100% UV additive and is not affected by seawater, algae and corrosion, it is long-lasting and ergonomic.
|Body||The hull is made of polyethylene as mono-block and double-walled with rotation technology. (Click here for polyethylene boat features.)|
|Body Weight||200 kg|
|Fully Equipped Weight||234 kg|
|Maximum Number of People||6|
|Maximum Horsepower||50 HP|
|Lifting Capacity||601 kg|
|Shaft||Long – Short|
|Color Option||All international RAL color codes|
- Storage (1 Piece):Integrated with the body, it is capped with polyethylene cover. It has 30 lt. volume.
- Storage box + seat (2 Pieces):Made of polyethylene with rotation molding. Each one has a volume of 60 liters.
- Storage box (2 Pieces):Integrated with the body and is capped with polyethylene cover. Each one has a volume of 50 liters.
- Fairlead (2 Pieces): Made of 4mm 316 quality chrome. With two inserts placed in the polyethylene body, the strength has been increased 5 times.
- Towing eye (1 Piece): Manufactured from 316 chromium as 4mm… The inner reel is polyethylene. With three inserts placed in the polyethylene body, the strength has been increased 5 times.
- Rope (2 Pieces): Each one is 7 mm thick and five mt long. Rope ends are covered with special waxing technique. It has a towing capacity of 7 tons.
- Cleat (3 Pieces):Made from 316 quality chrome, it has a special design that maximizes durability. The base of the design is 3mm, the reel is 22mm and the top is 4mm. With two inserts placed in the polyethylene body, the strength has been increased 5 times.
- Base (1 Piece):Made of polyethylene. It minimizes slippage with its specially designed surface.
- Handle (4 Pieces):Manufactured as 3mm of 316 quality chrome. It is specially designed to ensure comfortable grip and damage reduce to the hand. With two inserts placed in the polyethylene body, the strength has been increased 5 times.
- Thole (2 Pieces):Thanks to its special slot in the body, its durability is maximum. Made of 316 chromium. The base is 3mm and the bar has 18 mm radius. With two inserts placed in the polyethylene body, the strength has been increased 5 times.
- Engine mirror (1 Piece): 18mm plywood is fixed into the rotational polyethylene, by preventing direct contact with the water it becomes equally lasting with the polyethylene body.
- Mirror chrome (1 Piece) : Made of 3mm 316 quality chrome. A ridged surface has been created to prevent the engine from sliding.
- Water evacuation stopper (2 Pieces): Allows the water on the boat to be discharged out of the drain channels when desired.
- Wall cap (2 Pieces): Suitable to use as an extra storage area and increase the boat weight. It eliminates the moisture between the walls.
- U Bolt (1 piece) : Made of 316 quality chrome and reinforced with insert to maximize durability.